Profilsysteme

Profilsysteme sind aufgrund ihres geringen Gewichts und der idealen kombinierbarkeit vielseitig einsetzbar. Die Profile können nach dem Baukastenprinzip genutzt werden, da alle Profile durch die identische Form der Nut beliebig miteinander und auch mit allen ergänzenden Komponenten kombiniert werden können.
Profilsysteme

Mit einem 3D-Druck Projekt konstruieren wir ein Profilsystem mit verschiedenen Elementen. Die STL-Dateien werden in OpenSCAD erstellt.
OpenSCAD Programm

Profilsysteme
/*
*******************************************
Objekt Info: Profilsysteme
*******************************************
Version: 13.09.2023 khf
*******************************************
*/

//***************   Auswahl   *************
/*Auswahl
0=Demo,
1=tslot(h=10,w=10);
2=tslot(h=10,w=15);
3=tslot(h=10,w=20);
4=tslot(h=10,w=25);
5=tslot(h=10,w=30);
6=tslot(h=10,w=40);
7=tslot(model="halfslot1",h=10,w=20);
8=tslot(model="halfslot2",h=10,w=20);
9=twotslot(h=10,w=40);
10=twotslot(model="twoslot2",h=10,w=25);
11=tslot(model="tslot2",h=10,w=10);
12=tslot(model="tslot2",h=10,w=20);
13=tslot(model="tslot2",h=10,w=30);
14=tnut(h=10,w=30);
15=tnut(model="nut2",h=10,w=30);
16=tnut(model="nut3",h=10,w=30);
17=pulley();
18=sideg90();
19=twosidel90(90); //(Winkelangabge)
20=support908();
21=support904();
22=support902();
23=support901(w=30);
24=xyztslot();
25=elbow8m();
26=tap();
27=boltm8(mm=16);
28=corner90();
29=nutholder();
30=nut();
31=ecke();
*/

auswahl="0";

//***************   Libraries  ************

file_dxf="Profilsystem.dxf";

//*****************************************

//***************  Parameter   *************

tslotw=100;  //Groesse

//Parameter Ecke
beamWidth = 10.012;
border = 2;
totBeamWidth =(2* border) + beamWidth;
depth = 3;
width = 3;
factor = 1.5;
innnerCalibraition = 0.1;

//*****************************************

//**************   Programm  **************

//twosidel90(r=90);
module pulley(w=tslotw){
translate([0,-w/2,0])
union(){
support901(w=w);
translate([0,0,-w/2])rotate([-90,0,0])tnut(h=22,w=w);
}
}
//pulley();
//-----------------------------------------

module telescope(h=5,w=tslotw){
rotate([0,90,0])fourslots(h=h,w=w);
difference(){
cube([w*1.1,w*1.1,h],true);
cube([w,w,h*1.2],true);
}
}
//telescope(h=5);
//-----------------------------------------

module tnut(model="nut",h=10,w=tslotw){
translate([-w/2,-w/2,-h/2])scale([0.1*w,0.1*w,1])
linear_extrude(height=h)import( file=file_dxf, layer=model, $fn=60);
}
//nut(model="nut2",h=40);
//-----------------------------------------

module tslot(model="tslot1",h=10,w=tslotw){
translate([-w/2,-w/2,-h/2])scale([0.1*w,0.1*w,1])
linear_extrude(height=h)import( file=file_dxf, layer=model, $fn=60);
}
//tslot(model="tslot1",h=40);
//-----------------------------------------


module twotslot(model="twoslot1",h=10,w=tslotw){

translate([-w,-w/2,-h/2])scale([0.1*w,0.1*w,1])
linear_extrude(height=h)import( file=file_dxf, layer=model, $fn=60);
}
//twotslot();
//-----------------------------------------


module nut(m=6,h=4.5){
difference(){
union(){
for(i=[0:2]){
rotate([0,0,i* 360/6])cube([m+4.3,6,h],true);
}
}
cylinder(h=h*2,r=m/2,center=true);
}
}
//nut();
//-----------------------------------------

module nutholder(m=6,h=4.5){
nut();
cylinder(h=h*2,r=m/2,center=true);
}
//nutholder();
//-----------------------------------------

module corner90(w=tslotw){
rotate([45,0,0])rotate([0,-90,0])tria(h=w/10,w=w);
rotate([-45,0,0])translate([0,w/2,w/2])tnut(h=w,w=w);
rotate([-45,0,180])translate([0,w/2,w/2])tnut(h=w,w=w);
}
//corner90();
//-----------------------------------------

module tap(w=tslotw){
translate([0,0,1.5])union(){
intersection(){
cube([w,w,w],true);
union(){
difference(){

minkowski($fn=60){
cube([w-4,w-4,3],true);
cylinder(h=3,r=2);
}
translate([0,0,3.5])cube([w-2,w-2,4],true);
}
difference(){
cylinder(h=11,r=w*0.115);
cylinder(h=12,r=w*0.08);
}
translate([0,0,1.5])cube([w*0.3,w*0.13,3],true);
translate([0,0,1.5])cube([w*0.13,w*0.3,3],true);

translate([0,-w/2,4])cube([w*0.27,w*0.13,8],true);
translate([0,w/2,4])cube([w*0.27,w*0.13,8],true);
}
}
}
}
//tap();
//-----------------------------------------

module elbow(w=tslotw){
intersection(){
translate([-w/2,-w/2,0])cylinder(h=w+2,r=w+2,center=true);
cube([w,w,w],true);
}
translate([-w/2,0,0])fourslots(w=w);
translate([0,-w/2,0])rotate([0,0,-90])fourslots(w=w);
}
//elbow8m();
//-----------------------------------------


module boltm8(mm=16){
cylinder(h=mm,r=4);
translate([0,0,-6])cylinder(h=6,r=6.5);
}
//boltm8(mm=16);
//-----------------------------------------


module elbow8m(w=tslotw){
difference(){
union(){
        difference(){
                elbow(w=w);
                union(){
                        translate([-w*0.3,0,0])rotate([0,-90,0])boltm8(mm=16);
                        translate([0,-w*0.31,0])rotate([90,0,0])boltm8(mm=16);
                        translate([w*0.8,0,0])rotate([0,-90,0])cylinder(h=w+5,r=w*0.28);
                        translate([0,w*0.8,0])rotate([90,0,0])cylinder(h=w+5,r=w*0.28);  //8.2 when 30x30
                }
        }
}
}
}
//elbow8m();
//-----------------------------------------

module xyztslot(w=tslotw){
difference(){
union(){
cube(w,true);
translate([w/2,0,0])fourslots(w=w);
translate([0,0,w/2])rotate([0,90,0])fourslots(w=w);
translate([0,-w/2,0])rotate([0,0,90])fourslots(w=w);
}
union(){
cylinder(h=40,r=3.1,center=true);
translate([0,0,-2])cylinder(h=w,r=8,center=true);
rotate([0,90,0])cylinder(h=40,r=3.1,center=true);
translate([-2,0,0])rotate([0,90,0])cylinder(h=w,r=8,center=true);
rotate([90,0,0])cylinder(h=40,r=3.1,center=true);
translate([0,2,0])rotate([90,0,0])cylinder(h=w,r=8,center=true);
}
}
}
//xyztslot();
//-----------------------------------------


module fourslots(h=10,w=tslotw){
for(i=[0:3]){
rotate([90,90*i,90])tnut(h=h,w=w);
}
}

module support901(w=tslotw){
translate([0,0,0])union(){
translate([0,w/2-1,1])rotate([90,-90,90])tria(h=w,w=w/10);
translate([-w/2+w/20,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);
translate([w/2-w/20 ,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);

difference(){cube([w,w,2],true);
translate([0,0,0])cylinder(h=6,r=w/10,center=true);
}
translate([0,w/2,w/2-1])rotate([90,0,0])difference(){cube([w,w,2],true);union(){
translate([w/4.5,2,0])cylinder(h=6,r=w/10,center=true);
translate([-w/4.5,2,0])cylinder(h=6,r=w/10,center=true);}
}
}
}
//support901(w=30);
//-----------------------------------------

module support902(w=tslotw){
translate([0,0,0])union(){
translate([0,w/2-1,1])rotate([90,-90,90])tria(h=w,w=w/10);
translate([-w/2+w/20,w/2,-1])
rotate([90,0,-90])tria(h=w/10);
translate([w/2-w/20 ,w/2,-1])
rotate([90,0,-90])tria(h=w/10);

difference(){cube([w,w,2],true);
union(){
translate([w/4.5,0,0])cylinder(h=6,r=w/10,center=true);
translate([-w/4.5,0,0])cylinder(h=6,r=w/10,center=true);}
}
translate([0,w/2,w/2-1])rotate([90,0,0])difference(){cube([w,w,2],true);union(){
translate([w/4.5,2,0])cylinder(h=6,r=w/10,center=true);
translate([-w/4.5,2,0])cylinder(h=6,r=w/10,center=true);}
}
}
}
//support902();
//-----------------------------------------


module support904(w=tslotw){
translate([0,0,0])union(){
translate([0,w/2-1,1])rotate([90,-90,90])tria(h=w,w=w/10);
translate([-w/2+w/20,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);
translate([w/2-w/20 ,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);

difference(){cube([w,w,2],true);
union(){
translate([0,w/4.5,0])cylinder(h=6,r=w/10,center=true);
translate([0,-w/4.5,0])cylinder(h=6,r=w/10,center=true);}
}
translate([0,w/2,w/2-1])rotate([90,0,0])difference(){cube([w,w,2],true);union(){
translate([0,w/4.5,0])cylinder(h=6,r=w/10,center=true);
translate([0,-w/4.5,0])cylinder(h=6,r=w/10,center=true);}
}
}
}
//support904();
//-----------------------------------------

module support908(w=tslotw){
translate([0,0,0])union(){
translate([0,w/2-1,1])rotate([90,-90,90])tria(h=w,w=w/10);
translate([-w/2+w/20,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);
translate([w/2-w/20 ,w/2,-1])
rotate([90,0,-90])tria(h=w/10,w=w);

difference(){cube([w,w,4],true);
union(){
translate([0,w/4.5,0])cylinder(h=6,r=w/10,center=true);
translate([0,-w/4.5,0])cylinder(h=6,r=w/10,center=true);}
}
translate([0,w/2,w/2-1])rotate([90,0,0])difference(){cube([w,w,2],true);union(){
translate([0,w/4.5,0])cylinder(h=6,r=w/10,center=true);
translate([0,-w/4.5,0])cylinder(h=6,r=w/10,center=true);}
}
}
}
//support908();
//-----------------------------------------

module tria(h=2,w=tslotw){
translate([0,0,-h/2])linear_extrude(height=h)polygon(points=[[0,0],[0,w],[w,0]], paths=[[0,1,2]]);
}
//
//module tria3(h=8.2,w=tslotw){
//translate([-w*10/2,-5,-h/2])union(){
//for(i=[0:w-1]){
//translate([i*10,0,0])linear_extrude(height=h)polygon(points=[[0,0],[0,5],[5,10],[10,5],[10,0]], paths=[[0,1,2,3,4]]);
//}
//}
//}



module tsidel90(w=tslotw){
difference(){
        union(){
        translate([0,-w/2,0])fourslots(h=10,w=w);
        translate([-w/4,-w/2,0])union(){
                translate([w/2,0,0])cube([w/2,w,w],true);
                translate([22.75,0,0])cylinder(h=w,r=w/2,center=true);
                }
        }
translate([w-2,-w/2,0])rotate([0,90,0])cylinder(h=w,r=8,center=true);
translate([0,-w/2,0])rotate([0,90,0])cylinder(h=w,r=3.1,center=true);
}



}



module ttwosidel90(r=60,w=tslotw){
translate([-15,15,0])
union(){
                tsidel90();
                rotate([0,0,-r])translate([0,w,0])tsidel90(w=w);

}
}

//ttwosidel90();
//-----------------------------------------


module sidel90(w=tslotw){
difference(){
        union(){
translate([0,-w/2,0])fourslots(h=10,w=w);
        translate([-2.5,-w/2,0])union(){
                translate([5,0,0])cube([5,w,w],true);

                }
        }
translate([18,-w/2,0])rotate([0,90,0])cylinder(h=w,r=8,center=true);
translate([0,-w/2,0])rotate([0,90,0])cylinder(h=w,r=3.1,center=true);
}
}



module twosidel90(r=60,w=tslotw){
//translate([-w/2,w/2,0])
union(){
                sidel90(w=w);
                rotate([0,0,-r])translate([0,w,0])sidel90(w=w);

}
}

//twosidel90(50);
//-----------------------------------------


module sideg90(d=0,w=tslotw){
rotate([0,0,d])union(){
translate([-15,0,0])fourslots(h=10,w=w);
translate([-7.5,0,0])union(){
cube([15,30,30],true);
translate([7.5,0,0])cylinder(h=30,r=15,center=true);
}
}
}

//sideg90();
//-----------------------------------------
//-----------------------------------------
//***************  Ecke   *************

module connector()
{
        translate([-(totBeamWidth)/2,-(totBeamWidth)/2,-(totBeamWidth)/2])
        difference() {

        cube([totBeamWidth,totBeamWidth,beamWidth*2]);
        translate([border,border,beamWidth]) cube([beamWidth,beamWidth,beamWidth]);
        }
}
module connectorOuter()
{
        translate([-(totBeamWidth)/2,-(totBeamWidth)/2,-(totBeamWidth)/2])
        difference() {
                cube([totBeamWidth,totBeamWidth,beamWidth*(factor + 0.5)]);
                //translate([0,(totBeamWidth-width)/2,0]) cube([depth,width,beamWidth*(factor + 0.5)]);
                //translate([(totBeamWidth-width)/2,0,0]) cube([width,depth,beamWidth*(factor + 0.5)]);

}
}
module connectorInner()
{
        //translate([-(totBeamWidth)/2,-(totBeamWidth)/2,-(totBeamWidth)/2])
        translate([-(totBeamWidth)/2,-(totBeamWidth)/2,0])

                translate([border-(innnerCalibraition/2),border-(innnerCalibraition/2),beamWidth/2]) cube([beamWidth+innnerCalibraition,beamWidth+innnerCalibraition,beamWidth*(factor-0.5)]);

}

module cutout()
{
translate([totBeamWidth/2-border-depth,-width/2,totBeamWidth/2-border-depth]) cube([totBeamWidth,width,totBeamWidth]);
}

/*
union()
{
        connector();
        rotate([90,0,0]) connector();
        rotate([0,90,0]) connector();
}*/

//connectorOuter();


module ecke()
{
difference()
{
union()
{
        connectorOuter();
        rotate([90,180,0]) connectorOuter();
        rotate([0,90,0]) connectorOuter();
}
union()
{
        connectorInner();
        rotate([90,0,0]) connectorInner();
        rotate([0,90,0]) connectorInner();
}
union() {
 cutout();
 rotate([90,0,0]) cutout();
 rotate([90,270,0]) cutout();
}
}
}



//---------------- Ende Ecke ------------------------------------------------------


module demo(){
translate([0,40,5])color("DeepSkyBlue")tslot(h=10,w=15);
translate([50,20,5])color("DeepSkyBlue")tslot(h=10,w=25);
translate([56,-20,5])color("DeepSkyBlue")tslot(h=10,w=40);
translate([-26,70,5])color("Red")tslot(model="halfslot1",h=10,w=20);
translate([-26,95,5])color("Red")tslot(model="halfslot2",h=10,w=20);
translate([26,70,5])color("DeepSkyBlue")twotslot(h=10,w=40);
translate([-16,-40,5])color([0,1,0])twotslot(model="twoslot2",h=10,w=25);
translate([0,0,5])color([0,1,0])tslot(model="tslot2",h=10,w=10);
translate([20,0,5])color([0,1,0])tslot(model="tslot2",h=10,w=20);
translate([-30,0,5])color([0,1,0])tslot(model="tslot2",h=10,w=30);
translate([0,20,5])color("DeepSkyBlue")tslot(h=10,w=10);
translate([20,30,5])color("DeepSkyBlue")tslot(h=10,w=20);
translate([-30,40,5])color("DeepSkyBlue")tslot(h=10,w=30);
translate([20,-40,5])color("Silver")tnut(h=10,w=30);
translate([20,-25,5])color("Silver")tnut(model="nut2",h=10,w=30);
translate([20,-15,5])color("Silver")tnut(model="nut3",h=10,w=30);


translate([100,0,7])color("Silver")ecke();
translate([100,0,22])color([0,1,0])tslot(model="tslot2",h=10,w=10);
 rotate([90, 0, 0])
translate([100,7,15])color([0,1,0])tslot(model="tslot2",h=10,w=10);

 rotate([0, 90, 0])
translate([-7,0,115])color([0,1,0])tslot(model="tslot2",h=10,w=10);

}

 //-------- Print Auswahl --------------

module print(){
        if (auswahl == "1") {
                tslot(h=30,w=10);
        } else if (auswahl == "2") {
                tslot(h=30,w=15);
        } else if (auswahl == "3") {
                tslot(h=30,w=20);
    } else if (auswahl == "4") {
                tslot(h=50,w=25);
    } else if (auswahl == "5") {
                tslot(h=50,w=30);
    } else if (auswahl == "6") {
                tslot(h=50,w=40);
    } else if (auswahl == "7") {
                tslot(model="halfslot1",h=10,w=20);
        } else if (auswahl == "8") {
                tslot(model="halfslot2",h=10,w=20);
        } else if (auswahl == "9") {
                twotslot(h=10,w=40);
    } else if (auswahl == "10") {
                twotslot(model="twoslot2",h=10,w=25);
    } else if (auswahl == "11") {
                tslot(model="tslot2",h=10,w=10);
    } else if (auswahl == "12") {
                tslot(model="tslot2",h=10,w=20);
    } else if (auswahl == "13") {
                tslot(model="tslot2",h=10,w=30);
        } else if (auswahl == "14") {
                tnut(h=10,w=30);
        } else if (auswahl == "15") {
                tnut(model="nut2",h=10,w=30);
    } else if (auswahl == "16") {
                nut(model="nut3",h=10,w=30);
    } else if (auswahl == "17") {
                pulley();
    } else if (auswahl == "18") {
                sideg90();;
    } else if (auswahl == "19") {
                twosidel90(90); //(Winkelangabge)
        } else if (auswahl == "20") {
                support908();
        } else if (auswahl == "21") {
                support904();
    } else if (auswahl == "22") {
                support902();
    } else if (auswahl == "23") {
                support901(w=30);
    } else if (auswahl == "24") {
                xyztslot();
    } else if (auswahl == "25") {
                elbow8m();
         } else if (auswahl == "26") {
                tap();
        } else if (auswahl == "27") {
                boltm8(mm=16);
    } else if (auswahl == "28") {
                corner90();
    } else if (auswahl == "29") {
                nutholder();
    } else if (auswahl == "30") {
                nut();
    } else if (auswahl == "31") {
                ecke();
        } else {
                demo();
        }
}

print();
RAW code
Download Profilsystem.dxf